Brennenstuhl Solar Energy Set SES P1207 Solar celltype Amorphou User Manual download pdf (Page 5)

Solar Energy Set SES P1207

This product is a solar power supply system. It transforms sunlight

into DC electricity, which is then stored in the rechargeable bat-

tery. The battery can be used to power the provided LED lights

and other small DC applications, like charging MP3 players or

mobile phones. This product is good for cottage, camping, out-

door activity, and wherever there is no grid connection.

Description of parts

1 12W Amorphous Silicon Solar Module incl. 4m lead cable with

ring connector to the charge regulator (1x)

2 Charge Regulator (1x)

a ON/OFF switch

b Display „Charging“: Battery is charging

c Display „Working“: Device is ready

3 12V/7Ah Sealed Lead Acid Rechargeable Battery (1x)

4 LED DC Lamp with 3m cable and on/off switch, incl. mounting

screws (2x)

5 Connecting cable between battery and charge regulator

(length: 1m), with ring connector (1x)

6 Connecting cable with ring connector and cigar lighter adapter

socket (1x)

7 Mounting brackets and screws for the solar module (1x)

12V

USB

12V 12V

Fig. 1

Caution

Before using, carefully read and understand the instruction man-

ual. Keep it for further reference. Please connect with right polarity

to prevent damage. Red indicates positive (+), and black indicates

negative (-).

Do not short circuit any lead cables.

Always switch off charge regulator before connecting or disconnect.

Before connecting the components please install and ﬁ x the solar

module, charge regulator and battery as described following.

Please always connect with the sequence of:

A. Battery

B. Application (DC Lights ...)

C. Solar module

Please always disconnect with the sequence of:

A. Solar module

B. Application (DC Lights ...)

C. Battery

Max. output current from the charge regulator can not exceed 4A.

All the parts are not water proof, except for the solar module.

Please use the battery, charge regulator and applications only in

dry and secure areas.

Clean the surface of solar module periodically with a soft cloth.

Please charge the battery using the solar module prior to ﬁ rst use

for approx. 3 days with full sunlight or using a suitable charging

device.

This product is not intended for use by young children or inﬁ rm

person unless they are being adequately supervised by a respon-

sible person to ensure that they can use the application safely.

Do not expose the battery to ﬁ re or high heat. It may explode. Do

not dispose of the battery as waste.

How to use (See Fig. 1)

1. Rechargeable battery:

Connect the rechargeable battery to the “Battery”

terminal of

charge regulator. Use the provided lead cable (See Fig. 1, no.5).

Be sure to connect with right polarity. Please follow the con-

nection sequence:

A. Red cable (+)

B. Black cable (-)

For disconnecting use the reverse sequence.

Disregard may lead to damage or injuries!

Please charge the battery using the solar module prior to ﬁ rst use

for approx. 3 days with full sunlight or using a suitable charging

device.

2. Charge regulator:

2.1 Mounting:

A foldable eye hook hanger (see Fig. 1, 2d) is available at the

back of the charge regulator for mounting.

2.2 Protection functions:

The charge regulator provides following protections for the whole

system:

A. Over-discharge protection (Battery voltage < 11.0V ± 0.3V):

When activated, “Working” indicator (see Fig. 1, 2c) will go off,

the charge regulator will shut off power output from battery

to prevent damage to the battery. In such case, please stop

using any application, and charge the battery under good sun-

light for 2-3 days.

B. Over-charge protection (Battery voltage >14,0 - 14,5 V)

When activated, “Charging” indicator (see Fig. 1, 2b) will go

off, the charge regulator will shut off power input from solar

panel to battery.

C. Over-load protection (>4A): When output power is too big,

the fuse in the charge regulator will be melted to prevent dam-

age to the controller itself. In this case the fuse (4A) has to be

replaced in order to bring the charge regulator back to work.

The charge regulator has to be turned on (ON/OFF switch,

see Fig. 1, 2a) in order to activate all the above mentioned

protection.

2.3 Connecting possibilities

 Two 12V output sockets for audio jack (TS), 6,35mm connec-

tors, are available on top of the charge regulator. The provided

LED DC lamps can be connected to these output sockets. A

fully charged battery can support the two provided LED lights

for approximately 6-8 hours.

 The USB output can be used to charge standard USB devices

like MP3 players, digital cameras, mobile phones, navigation

systems.

 An included cigarette lighter socket can be connected to the

terminal of charge regulator (See ﬁ g.1, no.6). It could be

used like a standard cigarette lighter socket. Cigarette lighter

adapter devices not included.

1 2 3 4 5 6 7 8 9 10 ... 27 28

Comments to this Manuals

No comments

Brennenstuhl Solar Energy Set SES P1207 Solar celltype Amorphou User Manual Page 5

Comments to this Manuals

Related products and manuals for Accessories for electrical Brennenstuhl Solar Energy Set SES P1207 Solar celltype Amorphou